Comparison of The Fiber Characteristics of the Some Cotton Varieties Ginned by Using Sawgin and Rollergin

Özet

In this study carried out in 2015 under conditions of Kahramanmaraş province of Turkey, it was aimed at determining the effects of sawgin and rollergin methods on fiber quality in some cotton (Gossypium hirsutum L.) cultivars. In the study varieties of Lydia, Carisma, PG 2018, Flash, BA 440, BA 119 Maraş-92 and Erşan-92 were used as experimental materials. The trial was established according to factorial randomized block design with four replications. Seed cottons obtained from the trial were ginned in the rollergin and sawgin machines. In the obtained lint cotton samples, a number of fiber characteristics were determined by using HVI and AFIS fiber analysis devices. Ginnig outturn (38.6%), fiber length (30.21 mm), uniformity index (86.02%), fiber strength (31.76 g tex-1), spinning consistency index (SCI) (104.68) determined by using rollergin system were found higher than ones determined by using sawgin system (respectivelly 37.2%, 29.78 mm, 84.61%, 30.97 g tex-1, 94.50). Short fiber index (3.47%) and nep count (59.40 number g-1) obtained from rollergin system were found lower than ones obtained from sawgin system (respectivelly 4.38% and 119.34 number g-1). As a result it can be said that the rollergin method has positive effect on ginnig outturn, fiber length, uniformity index, fiber strength, spinning consistency index, short fiber index and nep count. When fiber length, fiber strength, spinning consistency index, nep size are considered together the best variety was Lydia cv. (respectivelly 30.87 mm, 32.56 g tex-1, 104.25, 675.63 μm). Ginning outturn, uniformity index, short fiber index, total particule number, dust particule number and trash count are considered together the best variety was Erşan-92 cv. (respectivelly 39.4%, 86.02%, 3.48%, 231.4 number g-1, 206.3 number g-1, 25.13 number g-1). For fiber fineness the best varieties were BA 119 and Maraş-92 cv. (respectivelly 4.78 mic. and 4.80 mic.).